Using CaseViewNet via Serial Connection
Open the CaseViewNet and left click the
The Welcome to the Connection Wizard will appear. Click
In the Creating a connection screen, select Direct (Serial) and click
at the Setting up your options screen.
Select the COM port assigned to the computer and click
at the Completing the connection screen.
The wizard will close and CaseViewNet will being receiving the feed.
Verify the COM port in
Reboot the computer, and run the connection wizard again.
Article ID: 71
Last updated: 07 Oct, 2014
Caseview/CaseViewNet -> CaseViewNet -> Using CaseViewNet via Serial Connection