Search:     Advanced search
Most Viewed
 
document Convert an MP3 to a WAV using Audacity
Download and Install Audacity: Download Audacity using a web browser of your choice or left click the link provided: http://www.audacityteam.org/download/ Save the file to your computer (e.g. Desktop). Install Audacity from the save location by double clicking the downloaded file. ...
document System Requirements for Case CATalyst
NOTE: Case CATalyst version 12 and higher use our keyless security option called e-Key. If you are eligible for e-Key and haven't converted yet, please contact Stenograph Technical Support at 800-323-4247 for more information. Operating System Windows 10 Windows 8.1 Windows 7 Windows Vista...
document Enable Function Keys in Boot Camp
When using Windows on a Mac computer, the function keys (F1-F12) may not work properly when using programs like Case CATalyst. This is because, by default, the function keys control hardware features like increasing the volume, the brightness of the screen, media keys, etc. This option can be...
document Installing Stenograph Writer Drivers in Case CATalyst
Installing Stenograph Writer Drivers in Case CATalyst Note: The following instructions are for users who are using Case CATalyst version 15 and above. If you are using Case CATalyst version 14 or below click here for information on how to install the drivers. Connect the writer to your computer...
document Installing Stenograph Writer Drivers on Windows 8/Windows 10
Installing Stenograph Writer Drivers on Windows 8/Windows 10 Note: If you are currently using Case CATalyst version 15 or above you can install the drivers in Case CATalyst. Click here for the instructions. Connect the writer to your computer with the USB cable and turn the writer on. Right...
document Export the Personal Dictionary via USB Cable
The following guide will go over the process of loading the Personal Dictionary onto a Luminex, Diamante, Stentura Fusion, and the élan Mira series of writers. Make sure you have the USB drivers for your writer installed on your computer. If not you can find the guide here. Connect the...
document Installing Stenograph Writer Drivers on Windows 7
Installing Stenograph Writer Drivers on Windows 7 Note: If you are currently using Case CATalyst version 15 or above you can install the drivers in Case CATalyst. Click here for the instructions. Connect the writer to your computer with the USB cable and turn the writer on. Left click on...
document e-Key Frequently Asked Questions (FAQ)
Q. What is e-Key? A. e-Key is a “dongle free” method of software security for Case CATalyst users. e-Key empowers users to activate Case CATalyst on a computer at home, a computer at work and even a spare computer that might be used occasionally. There’s no need to carry around a security...
document Setting Audio Levels for Case CATalyst
Setting Audio Levels for Case CATalyst From the Desktop of your computer, move your mouse to the lower right corner and find the icon that looks like a speaker. If you position your mouse over the icon, it will say Speakers. The icon usually is to the left of the clock. Right click on the...
document Installing the Stenograph PDF Printer
When Case CATalyst is installed on your computer, the Stenograph PDF Printer is installed as well. Sometimes the printer is not installed (rights on the computer do not allow printer installation) or is accidentally deleted from the computer. If this happens, the Stenograph PDF Printer can be...
document Print a Case CATalyst file to PDF
From Manage Jobs, left click on the file. Click the Print button (Ctrl-p) from the function toolbar. The Print dialog box appears. Under Output click Draft, Final, or Compressed. To set the options, click Print Options. Click the down arrow next to Printer and choose...
document Starting Realtime in Case CATalyst
From Manage Jobs click the Translate icon on the Function Bar or press Ctrl+t. The Translate window will appear. In the lower left corner, click on Options. The Options window will open. Click on the Realtime tab at the top. Under the Realtime tab on the left hand side...
document Case CATalyst on Mac Computers
Case CATalyst will run on a Mac computer but a version of Windows must be installed. Stenograph recommends using a utility that comes with Macs called Boot Camp. This utility helps create space on the hard drive so that Windows can be installed in addition to the Mac OS. After Windows has been...
document Audio Codecs in Case CATalyst
The best audio codec for your realtime session depends on whether you plan to transfer the audio to another computer and if so, what method you will use to effect that transfer. The following chart shows the size of an audio file at four hours and at eight hours using each of the available...
document Installing Security Device Drivers on Windows 7
Note: This guide is for customer's using Case CATalyst version 13 or below. Version 14 and above use our keyless security option, e-Key. Visit our FAQ page for information about e-Key. Plug the Security Device into a USB port on your computer. Left click on Start , and then in the Search...
document Transitioning from EZKeys to Keyboard Maps and Macros
The concept of EZKeys – recording one or more keystrokes and then playing back those recorded keystrokes via the spacebar plus one other key originated with a much different operating system than the one(s) we use today, back in pre-DOS and DOS-based Xscribe CAT products in the form of "Spacebar...
document Setup Audio Options on the Diamante
The options Record Audio During Job and Audio Format must be set before opening a job on the Diamante. All other audio options are accessible while writing. It is always good to test your settings to ensure the recording sound how you want it to sound. To set audio options: From the Opening...
document Backing Up Files in Case CATalyst
Backing Up Files in Case CATalyst Open Case CATalyst. Now click the Tools menu and select Backup (or press Ctrl+b) to backup your files. The Backup window will appear. Now we need to choose files to backup and where to save them. In this example we'll be backing up our System Files...
document Create and Modify Keyboard Maps
Keyboard maps are files within Case CATalyst that contain entries which determine the action that occurs, in Edit or Manage Dictionary, as a result of pressing a key or combination of keys on the keyboard. Sometimes they are called "shortcut keys." For example in the Default keyboard map Ctrl-j is...
document Associate an Audio file in Case CATalyst
Open the job and go to Tools, Audio, Associate Audio File (Alt-t, a, f). The Choose Audio File: dialog box will display. Select the file you would like to associate and click Open. A new dialog window will appear asking if the audio was recorded with CaseCatalyst. Select...
document Reading Steno Notes into Case CATalyst with external SD card reader
Reading Steno Notes into Case CATalyst with external SD card reader NOTE: The following article applies to the Luminex, Diamante, élan Mira A3, and Stentura Fusion writers. Take the Data SD card from your writer and plug it into the external SD card reader. Then plug the card reader into a...
document Print Steno Notes to PDF
Often a Court will require reporters to archive their steno notes in case the job needs to be transcribed at a later date. A good way to accomplish this is to print your notes to PDF. PDF stands for Portable Document Format. A PDF file is similar to taking a "picture", of the original source...
document Include the Update Area to Personal Dictionary
Include the Update Area to Personal Dictionary The following guide can also be used to merge any dictionary into another dictionary. For example: A job dictionary to another job dictionary, job dictionary to a case dictionary, etc. From Manage Jobs, click File, Open, Dictionary, Personal...
document Restoring Files into Case CATalyst
Restoring Files into Case CATalyst Open Case CATalyst and be at the Manage Jobs screen. Now click the Tools menu and select Restore (or press Ctrl+r) to restore your files. The Open window will appear. We need to browse to where our files are located. In this example we will be...
document Writer Compatibility Chart
The following information comes the writer's respective manufacturer's website and additional options on the writer may need to be set in order to start realtime in Case CATalyst. If you need assistance with your writer, please consult your writer documentation or contact the manufacturer. ...


Copyright 1996-2017 Stenograph, L.L.C.• All rights reserved.