Search:     Advanced search

Installing Stenograph Writer Drivers on Windows 10

Article ID: 11
Last updated: 11 Jan, 2021

Installing Stenograph Writer Drivers on Windows 10

Note:  If you are currently using Case CATalyst version 15 or above you can install the drivers in Case CATalyst.  Click here for the instructions.

  1. Connect the writer to your computer with the USB cable and turn the writer on.
  2. Right click on Start , and then left click on Device Manager.

  3. In Device Manager look for a category that says Other Devices.  Below that you should see a yellow exclamation point that says Luminex Machine, Diamante Machine, Stenograph Elan Mira, or Stenograph FusionRight click on the yellow exclamation point and left click on Update Driver.

  4. The Update Driver Software dialog window will appear.  Left-click Browse my computer for driver software.

  5. In the next screen type C:\Cat4\Drivers\Writer (or copy and paste this text) in the Search for driver software in this location field.  Then click Next.

  6. You will be prompted with a dialog window verifying the installation of the drivers. Click Install.

  7. When the writer's USB driver has finished installing, click Close.

  8. To confirm a successful installation has completed, a new category will appear that say Stenograph USB Writer without a yellow exclamation point next to it.

  9. After installing the writer USB driver, you may get another driver installation wizard to install the Stenograph Writer Serial Port.  Follow steps 4-7 to install the drivers.
Also read
document Installing Stenograph Writer Drivers in Case CATalyst
document Installing Stenograph Writer Drivers on Windows 7

Also listed in
folder Writers -> Elan Mira A3/Stentura Fusion
folder Writers -> Elan Mira G1/G2
folder Writers -> Luminex/Luminex II

Prev   Next
Using the RTF2Writer Program     Installing Stenograph Writer Drivers on Windows 7

Copyright 1996-2021 Stenograph, L.L.C.• All rights reserved.